CH 03
LINE
MIC
Using the components
Changing the sensitivity of the bodypack transmitter’s line input
To adjust the sensitivity of the line input to match the connected audio source:
Make sure that the line input is switched on (see previous section).
Connect the external audio source, switch it on and start playback.
Press the SET button .
The operating menu appears and the first menu item “CHAN” flashes on the display.
Repeatedly press the / rocker button until “SENSIT” flashes on the display and the LINE level display appears.
Press the SET button .
The current input sensitivity and the LINE level
display | appear on the display. | |
Press | the | / rocker button to change the |
input | sensitivity so that the LINE level display | |
shows full deflection during the loudest passages,
but the yellow LED PEAK | does not light up per- |
manently. |
|
Press the SET button | to permanently store the |
setting. |
|
“STORED” briefly appears on the display, indicating that the sensitivity of the line input has been stored.
41
