Using the components
Automatically switching the HDE 2020 D on/off
The receiver automatically switches on when you pull the earbows apart. The display switches on.
When you release the earbows, the receiver switches to standby mode (audio deactivated) and then switches off after 2minutes.
Switching the EK 2020 D on/off
You can connect an induction loop or any pair of head- phones with a 3.5 mm mono or stereo jack plug to the headphone socket of the EK 2020 D. The head- phone impedance must be 32 : or higher.
Connect the 3.5 mm jack plug of your headphones to the headphone socket of the EK 2020 D.
To switch the receiver on:
Briefly press the ON/OFF button |
| . | ||
| ||||
The display switches on. |
|
|
|
|
To switch the receiver off: |
|
|
|
|
Press the ON/OFF button |
| for 3 seconds. | ||
| ||||
|
When you unplug the headphones from the receiver or switch off the transmitter, the receiver automati- cally switches off after 5 minutes.
Switching the charging case on/off
To switch the charging case on:
Set the mains switch to the position “ | I”. | |||
The LED POWER |
|
| lights up. |
|
|
| |||
To switch the charging case off: |
| |||
Set the mains switch to the position “ | 0”. | |||
The LED POWER |
|
| goes off. |
|
|
|
| ||
|
|
|
30