Putting the components into operation
Note:
Always charge the accupack in the charging compartment of the charging case (see “Charg- ing the BA 2015 accupack” on page 33).
Inserting and replacing the batteries/accupack of the bodypack transmitter
For powering the bodypack transmitter, you can either use the rechargeable BA 2015 accupack or two 1.5 V AA size batteries. NB: Do not use any other rechargeable batteries!
Push the two battery compartment catches and open the battery compartment cover .
Insert the BA 2015 accupack or the batteries as shown in the diagram on the left. Please observe correct polarity when inserting the accupack/ batteries.
Close the battery compartment cover .
Connecting a microphone to the bodypack transmitter
Note:
Suitable Sennheiser microphones are listed on page 8.
Connect the microphone to the microphone input of the bodypack transmitter.
Lock the plug by screwing down the coupling ring.
Adjust the sensitivity of the microphone input as described on page 42.
27
