Using the components
Charging the receivers’
Place the receiver into one of the charging com-
partments | for receivers / | (light blue in the | ||
diagram). |
|
| ||
• | The LED | of the HDE 2020 D or | ||
• | the LED | of the EK 2020 D |
| |
lights up (see table). |
| |||
|
|
| ||
LED colour | Meaning |
| ||
red |
| The | ||
|
| being charged. |
| |
|
| |||
green | The | |||
|
| fully charged. |
| |
red |
| The temperature of the | ||
(flashing) | battery is over 40°C or below 3°C. | |||
|
| |||
yellow/ | The | |||
orange | Interrupt the charging process and contact | |||
|
| your Sennheiser Service. |
| |
|
|
|
|
|
Notes:
•Charging a completely discharged rechargeable battery of the HDE 2020 D takes approx. 2½ hours at room temperature.
•Charging a completely discharged rechargeable battery of the EK 2020 D takes approx. 5 hours at room temperature.
•However, the charging process may take longer if:
•the rechargeable battery is deep discharged and first has to be reconditioned by a deep discharge recovery charge,
•the temperature of the
perature is again within the permissible range (the LED of the HDE 2020 D or the LED of the EK 2020 D flashes red).
34