Using the components
•An additional temperature protection prevents overheating inside the charging case. If the tem- perature inside the charging case exceeds safety limits, the charging process will be interrupted and will only be restarted when the charging case has cooled down.
•When not using the receivers for extended periods of time, charge them about every six months in order to prevent deep discharge damage to the rechargeable batteries.
Setting a channel
To set the complete system to a certain channel, proceed as follows:
1.Set the bodypack transmitter/radio microphone to the desired channel (see next section).
2.Set one of the receivers to the same channel (see “Setting the channel on the receiver” on page 37).
3.Automatically set all other receivers to the same channel using the channel copy function (see “Setting the receiver channel(s) using the chan- nel copy function” on page 37).
Setting the channel on the bodypack transmitter/ radio microphone
To set the bodypack transmitter or the radio micro- phone to the desired channel, use the operating menu of the device. An overview of the operating menus is given from page 49 onwards.
35
