6
Using the components
Setting the channel on the receiver
In order for the receiver to receive the signal from the bodypack transmitter or radio microphone, it has to be set to the same channel.
To manually set the receiver channel: |
|
|
|
Press |
|
|
|
• the channel selection button | / | of | the |
HDE 2020 D or |
|
|
|
• the channel selection button | / | of | the |
EK 2020 D. |
|
|
|
The channel changes. The selected channel is shown on the channel display .
If the bodypack transmitter or radio microphone is transmitting on this channel, the RF signal indication indicates the field strength of the received RF signal.
Setting the receiver channel(s) using the channel copy function
The channel copy function lets you simultaneously set a maximum of 19 receivers in the charging case to the same channel. This is achieved by copying the current channel of the receiver placed into the charging com-
partment with channel copy function (master) | to |
all other receivers in the charging case. |
|
Place all receivers which are to be set to the same channel into the charging compartments for receivers (slaves, light blue in the diagram) .
Switch on the receiver whose channel you want to copy.
Place this receiver into the charging compartment with channel copy function (master) .
The LED COPY AVAILABLE lights up green as long as the channel copy function is available.
Press the COPY button to start the channel copy function.
The displays of all receivers which are successfully set to the same channel light up.
37
