CH 03
LINE
MIC
Using the components
Muting the devices
Muting the bodypack transmitter
Slide the MUTE switch to the left, to “ MUTE“.
The red LED LOW BATT/MUTE lights up perma- nently. The MIC level display no longer shows any deflection. The bodypack transmitter’s micro- phone input is muted.
Note:
The muting function (MUTE) mutes the microphone input but not the line input . This function enables a
To deactivate the muting function:
Slide the MUTE switch back to the right. |
| ||
The red LED LOW BATT/MUTE | goes off. The MIC | ||
level display and the LINE level display | indi- | ||
cate the current levels. |
|
|
|
Muting the radio microphone |
|
|
|
Turn the protective cap | so | that the | MUTE |
switch becomes accessible. |
|
| |
Slide the MUTE switch | in the direction of the | ||
arrow. |
|
|
|
“MUTE” appears on the display of the radio micro- phone. After 5 minutes, “CH OFF” appears on the display (see “Display of the energy saving mode” on page 16).
To deactivate the muting function:
Slide the MUTE switch back in order to transmit the audio signal again.
39