BEFORE OPERATION
Your oven comes
To operate the oven in Energy Save Mode:
1.Plug in the oven. Nothing will appear on the display at this time.
2.Open the door.
The oven display will show “.0”.
3.Close the door.
4.Heat the oven without food (See page 11).
NOTE:
You can change to Clock Set Mode if you prefer, see page 8 of the operation manual. If you decide to set the clock, Energy Save Mode does not work.
In Energy Save Mode, if you do not operate the oven for 2 minutes or more (i.e. closing the door, pressing the STOP key, or at the end of cooking), you will not be able to operate the oven until you open and close the oven door.
ENERGY SAVE MODE
Your oven has two operating modes, Energy Save Mode and Clock Set Mode.
The difference between them is that when you are not using the oven, in Energy save Mode nothing will appear on the digital display and in Clock Set Mode the time will be shown.
In Energy Save Mode, if you do not operate the oven for 2 minutes or more (i.e. closing the door, pressing the STOP key, or at the end of cooking), you will not be able to operate the oven.
To restore power on, open the door.
If you set the clock, energy save mode will be cancelled.
To start energy save mode manually, follow the instructions below.
Example:
To start the energy save mode, (the current time is 23:35):
1. Make sure the | 2. Press the CLOCK | 3. Adjust the display | 4. Press (START) +1min |
correct time | button once. | to 0 by rotating the | button. The power will be |
appears on the |
| TIME/WEIGHT | off and the display will |
display. |
| dial. | show nothing. |
| x1 |
| x1 |
Display: |
|
| ENGLISH |
|
|
|
7
