Sharp R-750D Before Operating, Getting Started, Stop/Clear, To Cancel a Programme During Cooking

A33271,Middle East R750D,EN O/M

Before Operating

*This oven is preset with the OPERATION GUIDE in English.

To assist you in programming your oven, the operation guide will appear in the display. In this manual, the display of operation guide is abbreviated.

*You can get operation guide in English, Malay or Russian. To change the language, see page E-30.

Getting Started

Step	Procedure	Pad Order		Display
1	Plug the oven into a power point and
	switch on the power.
2	Close the oven door.		as above

3

Press the STOP/CLEAR pad so that the oven beeps.

Only the dots will remain.

Stop/Clear

Press the STOP/CLEAR pad once to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

Heating without Food

Some smoke and odor may occur for a while at the beginning of GRILL, GRILL MIX or AUTO GRILL mode, but the oven is not out of order.

To remove the cause of the smoke and odor, operate the oven without food for 20 min. on Grill function before the first use and after cleaning.

Step	Procedure			Pad Order					Display
1	Ensure that no food is in the oven.
	Press the GRILL pad.
			®u«¡
								®u«¡
	Enter the heating time (20 min.).
2		2		0	0	0
									COOK
								®u«¡	©∂a
							COOK is flashing.
	Press the INSTANT COOK/START pad.
	IMPORTANT:							®u«¡	©∂a
	During this operation, some smoke and
3									COOK
	odor will occur. Therefore open the win-						The timer will begin to count
	dows or run the ventilation fan in the						down. When it reaches zero,
	room.						all indicators will go out and
							audible signal will sound.
	Open the door to cool the oven cavity.
4	WARNING:
	The oven door, outer cabinet and oven cavity will become hot and pay attention to avoid burn
	when cooling the oven.
		E – 6

Untitled-6 6 2/10/04, 6:43 PM