GB- 5 -
Installation and Operation of your Refrigerator
•The operation voltage of your refrigerator is 220-240 V and 50 Hz.
•A specially groundedplug has been connected to the power cable of your refrigerator.
This plug should be usedwith a specially grounded socket of 16 amperes. If there
isno such socket in your house, please have it installed by an authorizedelectrician.
• Our company shall not be held responsible for damages that
may arise due to utilizationwith no grounding installation.
•Place your refrigerator in a suitablespot that it will not be exposed
to direct sunlight.
• It should be at least 50 cm away from heat sourcessuch as
cookers, ovens, wing radiatorsand stoves and at least 5 cm
awayfrom electrical ovens.
• Your refrigeratorshould not be used in the open air and should
not remain underthe rain.
• If your refrigerator is juxtaposed with a deep freeze, it is
necessary to leavea space of at least 2 cm between them in
order to preventcondensation on the outer surfaces.
• Pleasedo not place any heavy objects on your refrigerator and
placeyour refrigerator in a suitable spotin such a way that there
will be a free space of minimum 15 cm on the t op.
• If your are going to place the refrigeratorbeside your kitchen
cabinets then you shouldkeep a clearance of at least 2 cm’s
between them.
• Toprevent the condenser (the black backside component with
fins)from touching the wall, put on the plastic distance guide in
its place rotating90°.
• To ensure smooth and vibration-free operation of your refrigerator, the adjustable
front feetmust be set at the suitable height and mutually balanced. Youcan ensure
this by turning the adjustable feet clockwise (or counter-clockwise). This process
should be performedbefore the food is placed in the refrigerator.
• Before using your refrigerator,wipe all its parts with warm water in which you shall
add one teaspoon of food soda,then rinse it with clean water and dry it. After the
cleaning process is completed,place all the parts back.
Before Starting to Operate Your Refrigerator
• During the firstoperation or to ensure the efficient operation of
the device following the relocation processes, allow your
refrigerator to remain idle for 3 hours (in avertical position),
then insert the plug to the socket. Otherwise, you may damage
the compressor.
• The firsttime you operate your refrigerator, an odor might be smelt.This odor shall
disappear once your refrigeratorstarts cooling.
• If the supply cord is damaged it must be replaced b yt he manufacturer or service
agent or similaryqualified people in order to avoid a hazard.