Sharp TINSZ2600RCZZ 144 @ s, 148 @ s, 145 @ s, Saving and Restoring All the Data

5Saving and Restoring All the Data

Set the mode switch to the PGM position.

Saving (writing) all the data

The comfirmation message is printed.

To execute *

s 144 @ s

1A

To cancel l

Restoring (reading) the saved data

The comfirmation message is printed.

To execute *

s 148 @ s

1A

To cancel l

*The message “ ” will appear and stay on the display until all data is completely written or read. When writing or reading is finalized, the message “SD FINAL” will be printed. In case an error occurs, a corresponding error message will be printed.

If you save all the data by using an SD memory card that contains some data, the existing data will be erased and replaced with newly saved data. If you need the existing data, use another SD memory card.

6Writing and Reading of Programming Data

Reading the graphic logo data

Set the mode switch to the PGM position.

The comfirmation message is printed.

To execute *

s 145 @ s

1A

To cancel l

* The message “ ” will appear and stay on the display until all data is completely read. When reading is finalized, the message “SD FINAL” will be printed. In case an error occurs, a corresponding error message will be printed.

65