Watching TV
Daily operation
Switching on/off
Standby mode
ESelect standby mode
If the Receiver is switched on, you can switch it to standby by pressing a on the remote control unit.
Changing channels
With PROG |
| With 0_9: |
|
| |
|
|
| l | 2 | 3 |
VOL | LAST | PROG | 4 | 5 | 6 |
| |||||
|
|
| |||
VOL | MUTE | PROG | 7 | 8 | 9 |
|
|
|
| ||
|
|
| AD | 0 | A/V |
ESwitching on from standby
From standby, press a on the remote control unit.
MENU HDMI WIDE
TEXT CH.LIST AUDIO SUBT 
NOTE
•If you are not going to use this Receiver for long periods of time, be sure to remove the power adapter from the supply. (Page 9).
•A small amount of electric power is still consumed with the Receiver in standby mode.
Adjusting the volume
Press the VOL+ button to increase the volume and the VOL- button to decrease the volume.
Switching between channels
Switch between the current channel and the previous channel by pressing LAST. Each press of the LAST button will toggle between the current channel and the previous channel.
Programme information
1Press the INFO button once to display times, channel, programme, start and finish dates.
2Press the INFO button again to display additional information about the current programme.
Selecting a video output source
Once the Receiver is connected to your TV using either a HDMI cable or SCART cable, you can select the appropriate output source by pressing A/V on the remote control unit.
Selecting an audio language
Some programmes are broadcast with multiple audio channels. Press AUDIO to display the audio menu.
INFORMATION | Audio Channel |
Select the audio channel that you want to use.
ENG |
| Stereo |
|
ENG |
| Stereo |
|
Up | Down | OK Select | Exit Exit Menu |
1Press a/b to select the desired channel.
2Press OK to confirm the audio channel
10
01/06/2010 16:02:55
