Sharp TU-T2 operation manual PIN Code reminder, ATC Hdmi 1.3, Hdcp

Appendix

Item		TU-T2 Digital Terrestrial HD Receiver for Freeview HD
Software	Over Air Download	Yes, via DVB-SSU
Upgrade	USB Port	Yes
	Display	4-digit 7-segment for time and channel number
		1 LED indicator
Front Panel
	Keypad	5 Keypads: Power, CH Up/Down, Volume Up/Down
	IR Sensor	Yes
	RF Input Connector	F type, Female (for NTSC)/IEC type, Female (for PAL), 75 Ohm
	Loop Through Output Connector	F type/IEC type, Male/Female, 75 Ohm
	Stereo (left & right) Audio output	Dual SCART for TV/VCR
		For TV SCART: w/ OSD and Volume adjustable
Rear Panel	CVBS, R/G/B video output
		For VCR SCART: w/o OSD and fixed Volume
	Digital Video & Audio Output	HDMI Connector
	Optical Digital Audio SPDIF	TosLink Interface
	RJ 45	Ethernet connection with unique Mac address
Power	Input Voltage	100~240 VAC, 50/60 z
		Normal Operation: TBD, Standby Mode: Less than 2W with build in power Save
Interface	Power Consumption
		mode to meet European initiatives EuP
		Customer Selectable Remote Controller (and Batteries)
	Accessory	User’s Manual
		HDMI Cable (1.5M)
	EMC/ Safety	Compliant to CE
	ATC	HDMI 1.3, HDCP
Others	Dolby	Dolby Digital Stereo, Dolby Digital+ (HE AAC)
		Dbook 6.1 compliant
		Tested to DTG Test Suite
	Software	Audio Description, receiver mix
		MHEG5 HD Dbook 6.1
		MHEG5 interaction channel
		MHEG5 iPlayer ready

PIN CODE reminder

NOTE

• You need to insert the PIN code here and refer it to the pages in the manual where this is covered.

NOTE

•Removal of a PIN code could be subject to a service charge and if you would like to use this feature the PIN code should be written down.

TU-T2_GB.indd 25

25

01/06/2010 16:03:16