Sharp UP-3500 instruction manual Sign-offoperation, Sign-offprocedure, Cashier sign-offprocedure

7.Sign-off operation

(cancellation of clerk assignment) (REG mode/MGR mode)

The sign-off operation is intended to cancel the assignment of a clerk to a machine and terminate his or her registration operation.

The sign-off operation at a machine (master or satellite) can be done only for the clerk who is in sign-on state at the machine and not in the middle of a registration entry.

Sign-off procedure

•For the contactless clerk key system: Remove the contactless clerk key.

*The contactless clerk key is optional.

•For the clerk entry key system:

Touch the same clerk entry key that you used to sign on.

•For the WMF clerk key system (option): Pull out the WMF clerk key.

*The WMF clerk key is not a SHARP product.

•For the code entry system: Touch the [CLK#] key.

NOTE

NOTE

•The sign-off operation can be made only for one clerk at a time.

•If a clerk signs on at a machine while another clerk has already signed on there using the clerk entry key system or the code entry system, the preexisting clerk is automatically signed off unless he or she is halfway through an item entry.

•If the sign-off operation for the contactless clerk key system is done while the corresponding clerk is still in the middle of a registration entry, the transaction is finalized automatically.

Your POS terminal can provide the clerk + cashier system instead of current system (clerk only system). If you want to change the system, please consult your authorized SHARP dealer.

Cashier sign-off procedure

•For the cashier entry key system:

Touch the same cashier entry key that you used to sign on.

•For the code entry system: Touch the [CSR#] key.

11