Sharp UP-3500 instruction manual Initial downloading, the preset data from the master

(2) Maintenance downloading

To update the preset data for the IRC system, follow the downloading procedure below. The preset data in the master is downloaded to each satellite without clearing its existing preset data.

1. Enter the PGM2 mode from the mode selection window.

2. Select “6 MAINTENANCE D/L” from the displayed menu. The MAINTENANCE D/L window will appear.

3. Select a preset data item for maintenance from the displayed menu.

Enter an appropriate code range or specify an appropriate code(s) if needed. The MACHINE No. window will appear.

4. If you wish to download the preset data to all satellites, select “1 ALL.” If you wish to download the data to certain satellite(s), select “2 MACHINE SELECT.” In this case, the MACHINE SELECT window will appear.

Touch a desired machine number(s) line and select “YES,” and then touch the [CONTINUE] key.

For initial setup of the IRC system, follow the downloading procedure below. When the preset data in the master is downloaded to each satellite, existing preset data in the satellite, if any, is cleared.

Enter the PGM2 mode from the mode selection window.

8. Downloading the contents of the programming to satellites – master

When you have completed the programming at the master, you can distribute the preset data from the master to all or desired satellites in the IRC system.

(1) Initial downloading

1.

2. Select “5 INITIAL D/L” from the displayed menu. The INITIAL D/L window will appear.

3. If you wish to distribute all preset data files in the master to satellites, select “29 ALL PGM.” (To display the hidden menu for the initial downloading, scroll the screen to the right or left using the right-pointing or left-pointing arrow key down on the screen.)

If you wish to distribute an individual preset data file, select the corresponding data item. Enter an appropriate code range or specify an appropriate code(s) if needed.

The MACHINE No. window will appear.

4. If you wish to download the preset data to all satellites, select “1 ALL.” If you wish to download the data to certain satellite(s), select “2 MACHINE SELECT.” In this case, the MACHINE SELECT window will appear.

Touch a desired machine number(s) line and select “YES,” and then touch the [CONTINUE] key.

NOTE	Check the contents of the programming of all the satellites in the IRC system that have received
	the preset data from the master.

12