3

Installing a paper roll

Precaution: The paper cutter is mounted on the printer cover. Take caution when installing paper rolls.

The register can print receipts or journals. For the printer, you must install the paper roll provided with the register.

Install the paper roll according to the procedure shown below with the power cord connected and the mode switch set to the PGM position:

1.Push the printer cover forward and detach it.

2.

Lift up the print roller release lever to unlock and open the

Print roller arm

 

 

print roller arm.

 

Print roller release lever

3. Set a paper roll in the paper roll cradle as illustrated at the

 

 

right.

To the printer

To the printer

 

Correct

Incorrect

4. Feed the end of the paper along with

the paper positioning guides as illustrated at the right.

Paper positioning guides

5. While holding down the paper, slowly close the print roller arm, and push down the arm until you hear a click locking the arm. Make sure securely you push down the center of the wing part of the arm as illustrated at the right. The paper will be fed automatically.

If the print roller arm is not securely locked, printing is not done right. If this problem occurs, open the arm, and close the arm as instructed above.

9