Sharp XE-A302 Removing the paper roll, 4Replacing the Paper Roll

4Replacing the Paper Roll

Be sure to use paper rolls specified by SHARP.

The use of any other paper rolls other than those specified could cause paper jamming, resulting in register malfunction.

Paper specification

Paper width: 2.25 ± 0.02 in (57.5 ± 0.5 mm)

Max. outside diameter: 3.15 in (80 mm)

Quality: Thermal paper

• Be sure to set the paper roll prior to using your machine, otherwise it may cause a malfunction.

Install the paper roll in the printer. Be careful to set the roll correctly.

(How to set the paper roll)

To the printer To the printer

CorrectIncorrect

Removing the paper roll

When a red dye appears on the paper roll, it is time to replace it. Replace the paper roll with a new one. If you plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate place.

Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself.

When not using the take-up spool (using as receipt paper):

Print roller arm	1. Remove the printer cover.
	2. Lift up the print roller release lever to unlock and open the print

roller arm.

3.Remove the paper roll from the paper roll cradle.

Do not pull the paper through the printer.

Print roller release lever

When using the take-up spool (using as journal paper):

Area to cut	1. Turn the mode switch to a position other than OFF with the
		power cord connected.
	2.
		Remove the printer cover.
	3.	Press the Fkey to advance the journal paper until its printed
	4.	part is out of the way.
		Cut the paper and remove the take-up spool.
	5.	Lift up the print roller release lever to unlock and open the print
		roller arm.

6.Remove the paper roll from the paper roll cradle.

Do not pull the paper through the printer.

69