Sharp XE-A302 Function parameters for C, X, Yand A(when using as CA key)

Key operation example Print

4@

R A

Function parameters for C, X, Yand A(when using as CA key)

To program “0” for all items

*2

*1ABC @s, C, Xor YA

To program for another key

			*2:Press skey for CA key setting.
*1:Item:			Selection:		Entry:
	A	Footer printing	Allow		1
			Disallow*		0
	B	Amount tendered entry	Compulsory		1
			Non-compulsory (for the CA or CHK keys)*		0
			Inhibit (for the CH1 or CH2 key)*		0
	C	Entry digit limit		0-8 (default: 8)

Footer printing

•This programming decides whether or not the machine should print a message at the foot of a receipt when a specified media key is used. With regard to programming method of footer logo message, refer to “Logo messages” section on page 46.

Amount tendered entry

•You may select amount tendered, compulsory or optional, for the Aand Ckeys.

•You may select amount tendered, compulsory or inhibited, for the Xand Ykey.

Entry digit limit

•For the X, Yand Ckeys, program upper limit entry amount for the tendered amount. For the Akey, program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented by the number of allowable digits for the maximum entry or total amount. When “0” is set, the operation of the corresponding key is prohibited.

Key operation example Print

018@

C A

ABC (A:0, B:1, C:8)

40