System connections

Make sure to unplug the AC power lead before making any connections.

75 ohms coaxial cable

External FM aerial

FM aerial

(commercially

 

available)

(not supplied)

To audio

 

 

(not

input socket

supplied)

 

To component video input sockets

To SCART input socket

PBPR

To video

input (supplied) socket

(not supplied)

To HDMI input socket

 

(commercially

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

available)

 

 

 

(commercially

 

 

 

 

 

 

To S-video input

 

 

 

 

 

available)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

socket

To coaxial digital audio

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

input socket

To audio output

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

sockets

 

(commercially

 

 

 

 

Right speaker

 

available)

 

 

 

 

 

 

 

 

 

 

Wall socket

(AC 220 - 240 V ~

50/60 Hz)

Red Black

Left speaker

Aerial connection

Supplied FM aerial:

Connect the FM aerial wire to the FM ANTENNA 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.

Note:

Placing the aerial on the unit or near the AC power lead may cause noise pickup. Place the aerial away from the unit for better reception.

External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

Note:

When an external FM aerial is used, disconnect the supplied FM aerial wire.

8

Page 8
Image 8
Sharp XL-DV75H operation manual System connections, Aerial connection, External FM aerial, Supplied FM aerial