Listening to the iPod, iPhone or iPad
(continued)
To disconnect iPod, iPhone or iPad
Simply remove the iPod or iPhone from the docking station or iPad connector from USB terminal. It is safe to do so even during playback.
Watching videos on a TV connected to iPod or iPhone
1Press the DISPLAY (TV OUT) button for more than 2 seconds until “TV OUT ON” appear on display.
2Press the ENTER button to start playback.
Notes:
If the TV Out setting is already turned on at video menu, the video is automatically displayed on the TV screen when ENTER key is pressed.
TV out display is not support through USB terminal. (iPad)
To return to watching video on iPod or iPhone screen, press the MENU button to enter video menu. Then press the DISPLAY (TV OUT) button for more than 2 seconds until “TV OUT OFF” appears. During iPod or iPhone video playback, pressing the DISPLAY (TV OUT) button will not toggle video out display between iPod and TV.
Caution:
Unplug all accessories for the iPod or iPhone before inserting it into the docking station.
Stop button (
) at main unit is invalid during iPod function.
Navigating the iPod, iPhone or iPad menus
1Press the MENU button to view the menu on iPod, iPhone or iPad unit. Press it again to go back to previous menu.
2Use the PRESET ( 
or 
) button to select an item on the menu and then press ENTER button.
Note:
When navigating the iPod, iPhone or iPad menu with remote control, do not operate any of the buttons on the iPod or iPhone unit. The volume level is adjusted by pressing the VOL (+ or
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod, iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to
Various iPod, iPhone and iPad functions
Main unit | Remote control | |
Function |
| Operation |
Dock/USB | Dock | USB |
Play | iPod | CD/USB Press in the pause mode. |
Pause | iPod | CD/USB Press in the playback |
|
| mode. |
Function | Main unit | Remote control | Operation | ||
Dock/USB | Dock | USB | |||
|
| ||||
Track up/ |
|
|
| Press in the playback | |
down |
|
|
| or pause mode. If you | |
|
|
|
| press the button in the | |
|
|
|
| pause mode, press the | |
|
|
|
| button to start the | |
Fast |
|
|
| desired track. | |
|
|
| Press and hold down in | ||
forward/ |
|
|
| the playback mode. | |
reverse |
|
|
| Release the button to | |
|
|
|
| resume playback. | |
Display/ | ____ | iPod | CD/USB | Press for more than | |
Toggle |
|
|
| 2 seconds to toggle | |
information |
|
|
| the video out display | |
display |
|
|
| between iPod or TV. | |
Repeat | ____ |
|
| Press to toggle repeat | |
|
|
|
| mode. | |
Shuffle | ____ |
|
| Press to toggle shuffle | |
|
|
|
| mode. | |
Menu | ____ | iPod | iPod | Press to view the iPod | |
|
|
|
| menu during iPod | |
|
|
|
| function. | |
Enter | ____ |
|
| Press to confirm the | |
|
|
|
| selection. | |
Cursor | ____ |
|
| Press to select the iPod | |
Up/Down |
|
|
| menu. | |
Listening to a CD or MP3/WMA disc
Disc playback
1Press the ON/STAND-BY button to turn the power on.
2Press the CD button on the remote control or FUNCTION button repeatedly on the main unit to select CD function.
3Press the OPEN/CLOSE button to open the disc tray.
4Place the disc on the disc tray, label side up.
5Press the OPEN/CLOSE button to close the disc tray.
6Press the 
(CD/USB 
) button to start playback. After the last track is played, the unit will stop automatically.
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast forward, “END” will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode (only for CD).
Rewritable
3/7/2012 10:35:23 AM
