Fm Set, Rec Set | Shenzhen High Power Tech C700 manual

4.6.4 FM SET

Enter FM SET window, you can select the RADIO MODE, FM BAND

MODE or SENSITIVITY.

Press VOL+ / VOL- button to set the output signal as STEREO or MONO in RADIO MODE.

STEREO: The output of frequency module is stereo signal;

MONO: The output of frequency module is mono signal.

Press “VOL+” / “VOL-“ button to set the FM band mode as WORLD or JAPAN in FM BAND MODE.

JAPAN: The reception band is 76~108MHZ;

WORLD: The reception band is 87.5~108MHZ.

Press “VOL+” / “VOL-“ button to set the SENSITIVITY as LOW,

MID or HIGH when automatic searching station.

Enter REC SET, you can set SYCHRONOUS of LINE-IN recording, and bit rate of each recording status.

Press “VOL+” / “VOL-“ button to set whether or not to record synchronously in LINE-IN recording.

OFF: The input signal are recorded into one and the same file when recording continuously;

ON: iMuz would stops recording and make a new file to start another record when the input signal has whisht interval over 3 seconds.