Sherwood R-671 manual Setting the Speaker Setup Manually, Before setting the speaker setup

SETTING THE SPEAKER SETUP MANUALLY

■Note: When the SPEAKER button is set to off or the EXTERNAL IN is selected as an input source, the speaker setup procedure cannot be performed.

Before setting the speaker setup

• Press the POWER switch to enter the standby mode and then turn the power on.

1	When selecting each setting mode,	2	When adjusting the selected mode
			to the desired setting,

• Each time the SPEAKER SETUP button is	• Each time the ADJUST UP(▲/〉) or DOWN(▼/〈)
pressed, the speaker setting mode changes in	button is pressed, one of the settings is selected
succession and is displayed for several seconds	and displayed for several seconds as follows.
as follows.

•When the speaker setting mode disappears, press the SPEAKER SETUP button repeatedly to select the desired mode.

• When selecting the subwoofer,			Y(es)	N(one)
	• When the subwoofer is set to “N”, the front speaker
“SUB-W Y”
	is automatically set to “L”.
• When selecting the front speaker size,	• You can select one of 2 different speaker settings.
“FRONT L”			L	S
		(L: Large, S: Small)
• When selecting the center speaker size,	• You can select one of 3 different speaker settings.
“CENTER L”
		(L: Large, S: Small, N: None)
• When selecting the surround speaker size,	• You can select one of 3 different speaker settings.
“SURR L ”
• When selecting the surround back speaker size,	• You can select one of 3 different speaker settings.
“SURR-B L”

19