Set the selected mode as desired.
3
■When the TONE CONTROL mode is selected, press the ENTER button to select the desired mode.
•Each time this button is pressed, the mode changes as follows:
ON: When adjusting the tone for your taste. (“DIRECT” indicator goes off.)
OFF: When listening to a program source without the tone effect.(“DIRECT”indicator lights up.)
■When the BASS or TREBLE mode is selected, press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the tone as desired.
• The tone level can be adjusted within the range of
•In general, we recommend the bass and treble to be adjusted to 0 dB(flat level)
•Extreme settings at high volume may damage your speakers.
•To complete tone adjustment, repeat the above steps ② and ③.
SELECTING THE SURROUND MODE
Example) When digital signals from Dolby Digital EX 6.1 channel source are input.
■ Notes :
• Depending on the input signal format, surround back speaker setting and the selected decoding mode, the selectable surround modes may differ.
•When the EXTERNAL IN is selected as input source, the SURROUND MODE cannot be selected.
•Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired surround mode.
• In case of playing analog stereo, PCM 2 channel or Dolby Digital 2 channel source in a Dolby Headphone mode, press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the desired listening mode.
46
