To listen with the headphones.
9
• Ensure that the SPEAKER button is set to off.
• Depending on the signal format which is being
input, you can listen in different Dolby
Headphone modes, stereo mode, etc. with
pressing the DSP MODE (<) / (>)
buttons.(For details, refer to “Listening in a Dolby
Headphone mode” on page 30).
25
When CD, VIDEO 1~3 is selected as
an input source
Select the digital or analog input
connected as desired.
4
• When playing back the program sources with
surround sound, refer to “ENJOYING
SURROUND SOUND” on page 29.
• When TUNER, TAPE, AUX or EXTERNAL IN is
selected as an input source, the digital input
cannot be selected.
Notes :
• When the selected optical or coaxial digital
input is not connected, the “DIGITAL” indicator
flickers, meaning no sound. (Refer to
“ENJOYING SURROUND SOUND” on page
29.)
• The sound from the component connected to
the selected digital input can be heard
regardless of the selected input source.
Adjust the (overall) volume.
6
Operate the selected component for
playback.
5
• Then “C-EQ OFF” is scrolled.
• Press it again to work, the “C-EQ ON” is scrolled.
• When 96 kHz PCM(2 CH stereo) signals are input
or the SPEAKER button is set to off, the cinema
EQ function does not work.
To compensate for edgy or shrill movie
sound tracks.
7
• “MUTE” will flicker.
• To resume the previous sound level, press it again.
To mute the sound.
8
• Each time this button is pressed, the
corresponding input is selected as follows ;