Sherwood RD-7106 manual Downmixing into 2 front channels

Adjust the delay time.

14

ADJUST

Each time this button is pressed in the Dolby Digital or Dolby Pro Logic mode, the delay time changes in regular intervals.

Each time this button is pressed in the Dolby Virtual mode, the delay mode changes as follows;

NARROW: Relatively long distance from the prime

listening position to front speakers. WIDE: Relatively short distance.

If the delay time disappears, start again from step 13.

In the Dolby Digital mode, repeat the

15 above steps 13 and 14 to adjust the rear delay time.

ENGLISH

Downmixing into 2 front channels

Allows the multi-channel DTS or Dolby Digital signal to be reproduced through only two speakers or through headphones.

When playing the DTS or Dolby Digital program sources, press the STEREO button.

STEREO

or STEREO

“ST” and the DTS or Dolby Digital indicators light up, indicating that the 2-CH downmix mode, and then the 5 discrete channels (front L, center, front R, rear L and rear R) are mixed down into 2 front channels.

To cancel the 2-CH downmix mode, select the desired surround mode.

When play is stopped or interrupted,etc., the 2-CH downmix mode is not canceled even though “ST” and the DTS or Dolby Digital indicators go off.

DTS and Dolby Digital multi-channel program material will be heard automatically in the 2-CH downmix mode if headphones are plugged in and the SPEAKER button is set to off. However, only the DTS or Dolby Digital indicator will be illuminated. Unplugging the headphones and setting the SPEAKER button to on will restore the previous mode.

19