Control Position and Name
Front Panel
POWER button
Turns on the main power supply.
Disc tray
Toggle for standby and on.
Open/Close 5 button
Press to open or close the disc tray.
STANDBY indicator
Lights in the standby mode.
Display
Play/Pause 
button
Begins to play disc (close disc tray first if it is open). Temporarily stops playback when a disc is playing. Press this button again for normal playback.
Stop 
button
Stops playing a disc. When disc is playing, if you press Stop 
and Play 
, the disc will start resume play. When Stop 
is pressed again during stop mode, the resume function is canceled.
Skip 
buttons
Allow you to move to the previous chapter or track / the next chapter or track on a disc.
Rear Panel
DIGITAL OUTPUT COAXIAL jack
Use coaxial cable to connect your DVD Player to an AV component that features digital input capability. If the component has a Dolby Digital or DTS decoder, you can enjoy
DIGITAL OUTPUT OPTICAL jack
Use optical cable to connect your DVD Player to an AV component that features digital input capability. If the component has a Dolby Digital or DTS decoder, you can enjoy
ANALOG OUTPUT jacks
Insert audio cables (left and rights) to these jacks on your DVD Player and to the corresponding Audio Input jacks (left and right) on your TV or receiver.
VIDEO OUTPUT VIDEO jack
Connect a video cable to this jack and to the Video Input jack on your TV.
VIDEO OUTPUT S-VIDEO jack
If your TV has a
VIDEO OUTPUT COMPONENT (PR/CR, PB/CB, Y) jacks
If your TV has component inputs, you can connect a component video cable to your TV and to your DVD Player for ideal video quality. The component video cable only carries the video signal; remember to connect the left and right audio cables. If you connect a TV that is compatible with a Progressive scan signal, you can enjoy both Interlaced and Progressive scan.
9
