Handset Operation

Press Keys:

ååååååååååååMENU Zååååååå ååååååååååååååååååååååååååååååååREGISTER HS [ååååååå

o [ååååååå

ååååååååååååååååååååååååååååREGISTER HS [ååååååå

åååååååINT Zååååååå Yååååååå

ååååååååååååMENU Zååååååå ååååååååååååååååååååååååååååååååDE-REGISTER[ååååååå

o [ååååååå

ååååååååååååååååååååååååååååååååDE-REGISTER?[ååååååå

Manual Registration

You may also manually register additional handsets to your base station.

Open the Menu.

Scroll to Register Handsets and press OK. PIN is displayed.

Enter the 4-digit system PIN (default: 0000) and press OK (see page 33 for Changing System PIN).

Entry will be flashing.

Press OK at the flashing prompt.

Underside of the base station

Hold down the Page/Registration key on the under- side of the base station for approximately 10 sec- onds until a signal tone is heard from the base sta- tion.

If all internal handset numbers are assigned, the in- tercom number 4 is reassigned. The handset that has been registered under number 4 will be dereg- istered.

When it has been successfully registered, the handset reverts to the idle state.

De-registering Handsets

Press the Intercom soft key.

Scroll to the handset to be de-registered.

Open the Menu.

Scroll to De-register and press OK. PIN is displayed.

Enter the 4-digit system PIN (default: 0000) and press OK.

Press OK at the prompt.

27

Page 29
Image 29
Siemens C88 user manual Manual Registration, De-registering Handsets, Underside of the base station