Installing the Telephone System
Connecting the Base Station
Power supply unit (220 V / 50 Hz with cord )
1
•Insert the small plug on cord into phone jack
•Place cord in the base cable channel
•insert power supply unit into wall outlet
Key to register additional handsets/Page handsets.
2
Telephone jack and tele- phone cord
•Insert plug on the telephone cord into telephone jack on base unit (clicks into place)
•Place cord in cable channel on the bottom of the base
•Insert other end of plug into telephone jack on the wall
•Only use the power supply unit included as indicated on the underside of the base.
•Use the telephone cord supplied. Do not use any old cords.
•Do not use an outlet controlled by a wall switch.
7
