Troubleshooting
Maintenance
Simply wipe the base station and handset with a damp cloth or an antistatic wipe. Never use a dry cloth as this can cause static discharge!
Troubleshooting
If your telephone does not behave the way you want it to, first try to solve the prob- lem using the following list. Hotline service tel 4006 706 007
Problem | Possible cause | Solution |
No display. | Handset not on | Hold down the end call |
|
| key a for 1 second |
| Batteries empty | Charge or replace the bat- |
|
| teries (see page 8). |
|
|
|
No reaction to keystroke. | Keypad protection on | Hold down the ª key |
|
| for 1 second |
No radio connection to | Handset outside the base | Move closer to the base |
the base station – all dis- | station range. | station. |
plays flashing. |
|
|
| Handset not registered | Register the handset |
|
| see page 26. |
| Base station off | Check the power connec- |
|
| tor at the base station |
|
| (see page 6). |
|
|
|
Handset in the base sta- | Line seized by a second | Maximum charging power |
tion is not charging. | handset for a long period. | is obest achieved when |
|
| phone is in idle state. |
|
|
|
The incoming call num- | The telephone number | Callers must permit the |
ber is not displayed al- | transmission is blocked. | transmission of their tele- |
though you have sub- |
| phone numbers at their |
scribed to the caller ID |
| network providers. |
Service. |
|
|
|
|
|
Error beep is generated | Wrong input | Repeat the procedure; |
(descending tone se- |
| note the display and, if nec- |
quence) |
| essary, refer to the operat- |
|
| ing instructions. |
|
|
|
37
