Setup 89

Data services

Basic setting and activation of the connection profiles for data transmission such as MMS, WAP.

The phone default setting varies from service provider to service provider.

•The settings have already been implemented by the provider. You can start immediately.

•Access profiles have already been created by your provider. Then se- lect and activate profile.

•The access profiles must be con- figured manually. In this case, you will receive the necessary data from the service provider or via the "Setting Configurator" at

(p. 124): www.siemens.com/ mobilephonescustomercare

Select profile

I

Select the profile.

C

Confirm selection.

Set profile

I Select the profile.

§Options§

Open menu.

§Edit§

Open the selection.

I

Select CSD settings, and/or

 

GPRS settings.

§Edit§

Select service and enter

 

data (see below).

§Save§

Save settings.

CSD settings

(Circuit Switched Data)

Dial-up

Enter ISP number.

number:

 

Call type:

Select ISDN or ana-

 

logue.

Login:

Enter login name.

Password:

Enter password (shown

 

as a series of asterisks).

DNS 1/DNS 2:

(optional).

 

 

GPRS settings

(General Packet Radio Service)

You can only start to use GPRS once you have activated GPRS on your phone (p. 88).

APN:

Enter service provider

 

address.

Login:

Enter login name.

Password:

Enter password (shown

 

as a series of asterisks).

DNS 1 (opt.):

(optional).

DNS 2 (opt.):