Siemens CFMC1315-LP Basic Settings, Network Settings in the Configuration menu

Configuration

7.2Network Settings

You can setup your camera basic setting, DDNS, and FTP server by selecting

Network Settings in the Configuration menu..

7.2.1Basic Settings

Basic

Camera Name	Input your camera name here. The default name is “nwcam05”.
Camera Name Enable
Network
DHCP	The IP address is automatically obtained when you select ON;
	otherwise, select OFF to manually setup the network setting.
IP Address	Input your IP address here when you select DHCP off.
Subnet Mask	Please use default number: 255.255.255.0
Default Gateway	leave blank as default setting. It is not necessary to enter Default
	Gateway if it is not used.
	Ask your Network Administrator for Default Gateway information.
Primary DNS	(same as above)
Secondary DNS	(same as above)
Port
Stream1-Stream2,	We recommend to use the default, if need to change please check
cropping1-5:	with system administrator.
UPnP
	If this item is selected “ON”, the camera can be detected automatically
	by PC. No necessary to have IpFinder installed.
AUDIO output
	If this item is selected “ON”, a voice message of camera’s IP address
	can be delivered to external speaker via Audio output port.

	27
Siemens Building Technologies
Fire Safety & Security Products	01.2009