Siemens CFMC1315-LP configurationmanual Camera-Cropping settings

Configuration

7.3.3Camera-Cropping settings

1.	Tick the "ENABLE" checkbox and fill in the name, then click “Set Cropping
	Area” to start cropping setting.
	Î A cropping setting screen will pop-up as shown, select one type of cropping
	from VGA, QVGA, 4CIF, 2CIF, CIF, QCIF, and free size on bottom screen, a
	red-mesh rectangle will appear on the screen.
2.	To select the cropping area, move mouse to the preferred position on screen,
	then click the left button, the red-mesh will jump to that position.
3.	Click “OK” to finish the setting, and return to the Cropping menu.
4.	Click “SAVE” to enable the setting.
32
Siemens Building Technologies
Fire Safety & Security Products	01.2009