Getting started

9

Getting started

The phone is packaged in dismantled form and must be re-assembled prior to using for the first time.

Your phone's display is supplied with a protective film. Remove this film slowly before assembling the phone.

Please do not use any tools, when removing the SIM card.

1

In rare cases, static discharge may cause discolouration at the edges of the display. However, this will disappear within approx. 10 minutes.

•Insert the battery sideways into the phone 2, then press it downwards 3 until it clicks into position.

Inserting SIM card/ battery

The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.

•Place the SIM card in front of the slot with the contact surface fac-

ing downwards. Then push the SIM card gently inwards 1 (ensure that the chamfered corner is in the correct position).

3

2

•To remove the battery, pull it out with the retaining tab on the side.