Getting started | 11 |
•If necessary, use the battery cover 3.
3
•Finally, close the cover again.
•Before removing the
RS MultiMediaCard™, carry out the Eject card function in the My stuff options menu. This pre- vents any data from being lost.
•To remove the
RS MultiMediaCard™, open the cover and press the card briefly (if necessary, use the battery cover). The card will pop out a little and you can remove it. To finish, close the cover again.
Charging procedure
The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours.
Y Display during charging
Charging time
A flat battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 °C to 45 °C. If the temperature ris- es/falls 5 °C above/below this, the charge symbol flashes a warning. The mains voltage specified on the power supply unit must not be exceeded.