Setup 91
•My BT name
The phone is given a name (max.
16 characters) – this is the name the partner sees. If no name is given, the phone uses the
•Visib.to others
Set how your phone should respond to other BT devices. This means (if “visible”) for example that the device address or the BT name of your phone is shown to other BT devices if they request this in order to receive or send data.
•Not visible
Your phone is not “visible” to other BT devices. Known devices such as
•Auto mode
Your phone is “visible” to other BT devices for several minutes. You will then be asked if “visibility” should continue.
Shown in the display
¨Bluetooth® activated.
© | Bluetooth® visible to others. |
ªBluetoothtransfer. ® during data
«Call to Bluetooth® device accepted.
Data services
Basic setting and activation of the connection profiles for data transmission such as MMS, WAP.
The phone default setting varies from service provider to service provider:
•The settings have already been implemented by the provider. You can start immediately.
•Access profiles have already been created by your provider. Then se- lect and activate profile.
•The access profiles must be con- figured manually.
If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at
www.siemens.com/ mobilephonescustomercare in the FAQ section.
Select profile
I Select the profile. C Confirm selection.
Set profile |
|
I | Select the profile. |
§Options§ | Open menu. |
§Edit§ | Open the selection. |
I | Select CSD settings, and/or |
GPRS settings. | |
§Edit§ | Make the settings as |
| specified by your service |
| provider. |