92 Setup
HTTP profile
The phone default setting varies from service provider to service provider:
•The settings have already been implemented by the provider. You can start immediately.
•Access profiles have already been created by your provider. Then se- lect and activate profile.
•The access profiles must be con- figured manually.
If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at
www.siemens.com/ mobilephonescustomercare in the FAQ section.
I | Make the settings. |
Authentication
Activate or deactivate encrypted dial
Fax/data
Fax/data mode using a PC
With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone.
Fax and data services must be enabled by the service provider. There are variations in fax and data recep- tion, depending on the network.
Please ask your service provider about this.
Send voice/fax | b |
Set this function on the phone before transmission so that you can switch from voice mode to fax mode.
Rec. voice/fax | b |
(Only if no special fax or data number is available)
Start the required communication program on your PC and activate the function on the phone during the call (the PC will take over the connection).
End transmission
End transmission with PC software and/or press B.
Rec. fax/data | b |
Your service provider has given you a number for telephoning and a fax/data number.
The call is signalled by a special ring- tone and the type of call (fax or data) is displayed. Now start the communication program on your PC to receive the fax/data.