AS-Interface

 

 

 

 

System components and accessories

 

 

 

 

Diagnostic units

 

 

 

 

 

 

■Overview

■Function

The AS-Interface Analyzer is used to test AS-Interface networks. Troubleshooting is made systematic, and permanent monitoring is made easier.

Faults during installation, e.g. loose contacts or EMC problems with extreme loads, can be detected by this analyzer.

The easily used software permits checking of the quality of com- plete networks without having detailed technical knowledge of the AS-Interface. The AS-Interface Analyzer additionally permits documentation for commissioning and implemented services through the simple generation of test reports for the recordings made.

Detailed diagnostics is made possible for advanced AS-Interface users by means of trigger functions.

■Benefits

•Simple and convenient operation permits diagnostics of AS-Interface networks without specialists.

•Fast troubleshooting is made possible by the intuitive display in statistics mode.

•Test reports provide proof of the state and quality of the instal- lation for servicing and approval.

•Reports facilitate remote diagnostics by the technical assis- tance department.

•Advanced trigger functions permit exact analysis.

•Process data can be monitored online.

Connection

As a passive station, the AS-Interface Analyzer listens to the communication on the AS-Interface network. At the same time, the analyzer is powered from the AS-Interface cable.

This bus monitor interprets the physical signals, and records the communication.

The obtained data are transferred to a PC (usually a notebook)

 

via an RS232 interface, and evaluated there using the supplied

 

diagnostics software.

6

Online statistics

This mode provides a fast overview of the existing AS-Interface system. The error rates per slave are displayed in a traffic signal function (green, yellow, red).

The slave configuration and the currently transmitted data are displayed in a clear manner.

The expanded statistics provides information on the numerical data of the transmitted telegrams.

Siemens IK PI · 2004

6/149

Page 148 Page 150
Page 149
Image 149
Siemens EN 50295 manual Diagnostic units, 149, Online statistics
Page 148 Page 150

EN 50295 specifications

Siemens EN 50295 is emerging as a pivotal standard in the domain of electrical safety and design, particularly relevant for the electrical industry and equipment manufacturing sectors. Primarily, this European Norm is geared towards ensuring the safety of electrical systems used in dry environments, which is essential for various industrial applications.

One of the main features of the EN 50295 standard is its comprehensive safety requirements which are aimed at mitigating the risks associated with electrical systems. This includes aspects like insulation resistance, protective earthing, and the management of electrical faults. By setting a benchmark for safety, Siemens EN 50295 assists manufacturers in maintaining compliance with national and international regulations, thus protecting both users and equipment.

The standard emphasizes the importance of safety measures in the design process. It outlines criteria for components, assembly methods, and system installation, ensuring that electrical equipment operates stably and gets rid of risks related to electrical failures. This involves rigorous testing of materials and components, which enhances their reliability and longevity while providing efficient overall operation.

Siemens EN 50295 also incorporates advancements in technology, acknowledging the significance of intellectual innovation in the industry. It encourages the integration of smart technologies and automation features into electrical systems, paving the way for enhanced operational efficiencies. Such technologies not only improve the performance of electric systems but also contribute to energy conservation, reducing the overall environmental footprint.

Another characteristic of the EN 50295 standard is its adaptability. The framework it provides can be customized depending on specific industry needs, making it versatile across various sectors such as manufacturing, construction, and transportation. This adaptability ensures that businesses can maintain high safety standards while still allowing room for innovation and modern practices.

In summary, Siemens EN 50295 presents a well-rounded approach to enhancing safety, reliability, and sustainability in electrical systems. Its features and characteristics are set to guide industries in making informed decisions regarding electrical configuration, ultimately fostering a safer and more efficient working environment. The incorporation of emerging technologies ensures that the standard remains relevant in a fast-evolving technological landscape, proving to be an invaluable asset for manufacturers and service providers alike.
Top Page Image Contents