Siemens EN 50295 manual OUT1, OUT2

AS-Interface Slaves

I/O modules for operation in IP20 control cabinet

SlimLine

■Technical specifications (continued)

		2 inputs/2 outputs	2 inputs/2 outputs	2 inputs/2 outputs
		Screw-type connection	Screw-type connection	Spring-loaded connection
		Standard slave	Standard slave	Standard slave
		2-wire	2-wire	2-wire
		PNP transistor (2 A)	Relay	PNP transistor (2 A)
		3RK1 400-0BE00-0AA2	3RK1 402-0BE00-0AA2	3RK1 400-0BG00-0AA2
	Total current input in mA	￿50	￿50	￿50
	Inputs
	• Sensor supply via AS-Interface
		Short-circuit and overload with-	Short-circuit and overload with-	Short-circuit and overload with-
		stand capability	stand capability	stand capability
	• Voltage range in V
		20 to 30	20 to 30	20 to 30
	• Current carrying capacity
		--	--	--
	for sensor supply in mA
	• Connection of sensors
		2-wire system	2-wire system	2-wire system
	• Switching level High in V
		10	10	10
	• Input current Low/High in mA
		￿1.5 / ￿5	￿1.5 / ￿5	￿1.5 / ￿5
	Outputs
	• Type of output
		PNP transistor	Relay	PNP transistor
	• Current carrying capacity
		2	--	2
	per output in A DC 12 / DC 13 typ.
	• Maximum summation current
		4	--	4
	per module in A
	• Short-circuit protection	Built-in	External back-up fuse	Built-in
	• Inductive interference protection
6		Built-in	Not applicable	Built-in
	(free-wheeling diode)
	• Polarity reversal protection
		Not built-in	Not applicable	Not built-in
	• External 24 V DC supply voltage
		Via terminals:	Not applicable	Via terminals:
		Terminal 7 = "+“		Terminal 7 ="+“
	• Ith	Terminal 10 = "-“		Terminal 10 = "-“
		--	6	--
	• AC-15
		--	3	--
	• DC 13 24 V
		--	1	--
	• DC 13 110 V
		--	0.2	--
	• DC 13 230 V
		--	0.1	--
	• Watchdog
		Built-in	Built-in	Built-in
	I/O configuration	3	3	3
	ID/ID2 code	0/F	0/F	0/F
	Assignment of data bits
	• Data bit D0
		IN1	IN1	IN1
	• Data bit D1
		IN2	IN2	IN2
	• Data bit D2
		OUT1	OUT1	OUT1
	• Data bit D3
		OUT2	OUT2	OUT2
	Connection	Screw terminals	Screw terminals	Spring-loaded terminal connection
	Conductor cross-sections in mm2	--	--	Solid: 2 ￿(0.25–1.5)
				Finely stranded with end sleeve:
				2	(0.25–1)
				Finely stranded without end sleeve:
				2 ￿(0.25–1.5)
				AWG conductor connections solid
				or stranded: AWG 2 ￿(24–16)
	Note	--	--	Disassembly tool for spring-
				loaded terminal connection:
				See accessories

6/80

Siemens IK PI · 2004