Siemens Gigaset M49AM Internal talking paging, Transferring calls, Base paging the handsets

Gigaset M49AM user manual

the others will still be sounding. Or press again the Paging key on the base to stop paging all handsets.

Note: If there is no answer, the paging will stop in 2 minutes.

Internal talking (paging)

The base paging the handset(s)

In standby, press the INT key on the base, you will see “Paging Extension?” on the display. Then press one handset number. (Press 1 2, 3 or 4 that stands for the corresponding handset).

The relevant handset will sound.

Press the INT key or the Talk key on the handset to start inter-talking.

Press the INT key on the base or the handset to end the inter-talking.

The handset paging the base or other handsets

In standby, press the INT key on the handset.

You will see “Paging Extension?” on the display. Then press “0” to page the base, or the handset number (1, 2, 3 or 4) to page the handset(s).

The base or the relevant handset(s) will sound.

Press the INT key or hands-free key on the base to start inter-talking with the handset. “Intercom” will appear on both the handset and the base. You can also press the INT key or Talk key on the other handsets to inter-talk with the handset. Then, “Intercom” will appear on the display of both handsets.

Press the INT key on the base or INT key or End key on the handset to end the inter-talking.

Note:

1.When then handset is inter-talking and a call comes in, it will ring. Press the Talk/Flash key on either side to answer the incoming call.

2.If you have entered the name of the handset on registration, the name will be displayed on the screen of the other handset.

3.The paging ring will last 2 minutes. If the paged handset does not answer, the paging handset will ring, “No Answer” will be displayed on its display and it will return automatically to Standby status.

Transferring calls

When you are answering a call, you can transfer the call to the base or another handset.

21