Gigaset M49AM user manual
number you want to redial.
Press the
Or press the
Holding a Talk
When you are talking over the base or the handset, press the Hold key to pause talking without ending the call. When you are ready to resume the talk, simply press the same key again.
Note: During holding, if you want to transfer the call to a handset or a base, please refer to “Incoming Call Transferring” program.
Temporary Switching to Tone Dialing
This function is designed for pulse dial users. This function can change the pulse dialing to tone dialing temporarily to access the service systems that requires tone dialing. For example, after accessing banks or credit card companies, if the user wants to operate in their internal system, then he/she must change the pulse dialing to tone dialing temporarily.
When the call is put through, press Tone key, then the numbers dialed later are all in Tone mode.
Note: The change of dial modes is only valid for this call. When the call ends, it will automatically return to the original dialing mode.
Displaying Incoming Numbers (Calling Line
Identification)
This phone can display incoming call numbers from FSK or DTMF system and save up to 40 numbers (15 digits or letters), and each number is recorded with its incoming time (only applicable for FSK system.).
Searching Incoming Numbers
Press the Incoming call key on the base or the handset, you will see the number of calls you have received on the display.
Press or - key to display the latest incoming call number, press again the same key to display the next incoming call
number. |
|
Press | or - key to display the previous incoming call number. |
Press the Exit key on the base or End key on the handset to exit. Note: If certain numbers are repeated, there will be indicators “Repeat” with the numbers.
15
