Siemens Gigaset M49AM user manual Basic Operation

Gigaset M49AM user manual

Basic Operation

Answering a Call

Press the Hands-Free key on the base, or press the Talk/Flash key on the handset, or pick up the handset from the base (only when set to the Auto Talk function).

To end a call, press either the Hands-Free key on the base or the End key on the handset. You may also simply put the handset back on the base.

Making Calls

Press the Hands-free key on the base or the Talk/Flash key on the handset, and then enter the phone number. Or enter the phone number, and then press the Hands-free key on the base or the Talk/Flash key on the handset.

To end a call, press either the Hands-free key on the base or End key on the handset. You may also simply put the handset back on the base.

Adjusting Volume

When talking, INT or playing messages, press the Volume + or – key on the base or the handset to adjust the volume.

In Use / Charge Indicator

When the handset is in use or charging, the “In Use / Charging” indicator on the base will automatically light. When a call comes in, the indicator will flash.

Flash Function

Press the Flash key on the base or the Talk/Flash key on the handset when the handset is picked up. This equals to end a call and redial a number without hanging up the phone.

Mute Function

When you are talking or intercom over the base or the handset, press the Mute key, then the other end will not hear you. Press again to resume talking.

Redial Function

The base and the handset can store 5 sets of phone numbers respectively; each set can be up to 48 digits.

In Standby, press the Redial key on the base or the handset, you will see the last number dialed in the display.

Press or key on the base or +/- key on the handset to search the

14