Gigaset M49AM user manual

Note: If you want to cancel deregistration, simply press the End key to exit or long press the End key to go back to the Standby Status.

“De-registering” means de-registration in process.

After hearing the confirmation beep, you will see “Handset 1 de-registered” in the display, and it will change to “Register handset?”. Then de-registration completes and get ready to re-register a handset.

Setting Incoming Call Log

You can set the incoming call log respectively on the base and the handset.

Press the Set up key on the base or the Hold/Set up key on the handset to open the Menu.

Press

or

key on the base or +/- key on the handset to “Call

Log”, and then press the Set up or Hold/Set up key.

Press

or

key or +/- key to select “All Calls” or “Missed

Calls”.

 

 

Press the Set up or Hold/Set up key to confirm.

Note: If you select “Missed Calls”, the answered calls will not be recorded in the incoming call log.

Setting Display Contrast Level (Base)

Press the Set up key on the base to open the Menu.

Press

or

key to “Contrast”, then press the

Set up key.

Press

or

key or digit keys (1, 2, 3) to

select a desired

contrast.

 

 

 

Press the Set up key to confirm.

Setting Number Of Rings

Press the Set up key on the base to open the Menu.

Press

or

key to “No. of rings”, then press the Set up key.

Press

or

key to select the number of rings (2 rings, 4 rings,

toll saver).

 

Press the Set up key to confirm.

Toll Saver Mode

Note: if the ring is set to “Toll Saver” and you want to know if there are messages on the home answering machine, simply dial your home number with answering machine connected. If after

11

Page 11
Image 11
Siemens Gigaset M49AM user manual Setting Incoming Call Log, Setting Display Contrast Level Base, Setting Number Of Rings