9. RVS COM Lite
9. RVS COM Lite
9.1 Welcome to RVS-COM Lite
It's simple and easy to use RVS-COM Lite to manage all your important communications tasks without fuss or bother. RVS-COM is fully compatible with most popular communications devices and services and lets you start as soon as you have installed the program.
RVS-COM Lite may only be distributed in conjunction with a communications device. Please inform us if you purchased RVS-COM Lite without any hardware, as this software may not work properly with the hardware you are using.
RVS-COM Lite provides you with the most important functions of RVS-COM Standard. Some functions, however, are not included or are limited. If you need these functions then use the opportunity to upgrade for a low price.
9.2 Operating Requirements
Operating system: Microsoft Windows 95, Windows 98 or
Windows NT 4.0
PC/CPU: IBM AT-type PC with Intel-compatible CPU 486 DX 66 (Pentium recommended).
SoftwareFax reception at 14,400 bps and RVS Softmodem require a Pentium-type CPU (Pentium 133 recommended).
RAM: 8 MB minimum for Windows 95 (16 MB recommended), 16 MB minimum for Windows 98 and NT (24 MB recommended)
Hard disk space: 25 MB before installation. There should be at least 16 MB available on the hard disk for virtual memory when running the program.
Graphics card: At least 640*480, 16 colour VGA display
CD-ROM drive is required for the installation of RVS-COM Lite.
You will need a full-duplex-capable audio device (sound card) for telephony.
RVS-COM Lite is designed for your communications device. To install this, please see the manufacturer's instructions for the device. Some communications devices require special driver programs supplied by the manufacturer. If this applies to your device, then please install these driver programs according to the manufacturer's instructions.
If you are using an ISDN router with RVS ISDN DCP, the CAPI is installed with RVS-COM Lite. Please refer to the README.RTF file in the root directory of your I- Surf USB CD.
