Siemens I-SURF manual Uninstalling Version, Device Driver Update

6. Installation and Configuration under Windows 98

6.2 Uninstalling

To remove the device driver software and the ISDN utilities from your computer, you need to start the Uninstall program:

Program Files/I-Surf USB Utilities/Uninstall

You need to reboot your computer after uninstalling.

6.3 Uninstalling Version 1.0

If you have installed the Windows 98 device driver for Version 1.0 of I-Surf USB, you must first uninstall this version. You may start the required Uninstall program (rem_drv_old.exe) from the installation menu of the new CD-ROM.

The program will first check if Version 1.0 of I-Surf USB is present, and uninstall this device driver if found. The PC is then rebooted, and installation of the current version continues.

The Uninstall program rem_drv_old.exe can only be used for Version

1.0of the I-Surf USB driver. Different drivers will be ignored.

6.4Device Driver Update

The device driver is updated by uninstalling the current installation. Once the PC has been rebooted, the ISDN Adapter hardware is again detected, and the device driver installation process is activated.

22