Siemens programming the cpu 314c-2dp manual Automation and Drives SCE

Automation and Drives - SCE

12.With most S7-300 CPUs, the addresses of the I/O modules can be altered.

This is done by double-clicking on the corresponding modules and altering their settings in the 'Addresses' tab.

A note should always be made of these addresses (addresses assigned automatically are usually tied to a specific slot). ( → DI24/DO16 → Addresses → Deselect System Default → 0 → Deselect System Default → 0 → OK )

Foreword	Notes	Hardware configuration	STEP 7 program	Testing
T I A Training Document		Page 19 of 25		Module
				A5
Issue date: 02/2008			Programming the CPU 314C-2DP