|
| Automation and Drives - SCE |
|
| SEITE: |
1. | Foreword | 4 |
2. | Notes on Using the CPU | 6 |
2.1 | Operator Control of the CPU 31xC | 7 |
2.2 | Memory Concept of the CPU 31xC | 9 |
3. | Creating the Hardware Configuration for the CPU | 11 |
4. | Writing a STEP 7 Program | 21 |
5. | Testing the STEP 7 Program | 24 |
The following symbols provide guidance through this module:
Information
Programming
Task example
Notes
T I A Training Document | Page 3 of 25 | Module |
|
| A5 |
Issue date: 02/2008 |
| Programming the CPU |
