Print via.../Send via .... | 107 |
Search device
Search for Bluetooth™ devices. The device just found is shown in the display.
• Device sought is found:
§View§ Search is ended and devices that have been found are displayed.
G Select device.
§Select§ Send.
• More than 10 devices found:
The search will finish when 10 devices have been found. If the device you are looking for is not on the list displayed:
§Options§ Open menu.
Retry Repeat search. If the device you are looking for is found, continue as above.
• If time limit is exceeded:
The search is ended if the maximum amount of time available is exceeded.
Device addr.
You can directly enter the device address in order to set up a connection.
JEnter device address.
§OK§ Send.
Last connect.
The list of most recently connected devices is shown.
GSelect device.
§OK§
To receive via Bluetooth™Bluetooth™ must be activated (page 95). Received files are indicated by an icon above the left soft key.
• Known device:
If the sender is a device that is on the list of known devices, data will be received immediately.
• Unknown device:
With an unknown device it may be necessary to enter a password. This password will not be saved and can be reset with each new connection.
JEnter password.
§OK§ Start transmission.