Configuration / diagnostics using remote mechanisms
6.3 Configuration using Web Based Management (WBM) and Command Line Interface (CLI)
SCALANCE X-200
194 Operating Instructions, 12/2011, A5E00349864-19
Table 6- 15 Agent Configuration - CLI\AGENT\IP>
Command Description Comment
info Displays information on the IP settings.
ip [IP address] Specifies the IP address. DHCP is disabled. Administrator only.
subnet [subnet mask] Specifies the subnet mask. Administrator only.
gateway [IP address] Specifies the IP address of the default IP
gateway.
Administrator only.
dhcp [E ¦ D] Enables / disables DHCP. Administrator only.
dhcptype [M ¦ N ¦ C ¦ D] Specifies the DHCP parameters:
- M MAC address
- N system name
- C client ID
- D PNIO device name
Administrator only.
clientid [client ID] Specifies the DHCP client ID. Administrator only.
6.3.5.17 The "Ping" WBM menu
Reachability of an address in an IP network
The ping function in Web Based Management has exactly the same function as the terminal
function of the same name. It checks whether an address exists in an IP network.
IP address
Enter the IP address of the network device you want to ping to test whether it can be
reached.
Repeat
Here, enter the number of data packets to be sent.
Ping
Click this button to start sending the data packets.
Ping Output
This box shows the output of the ping function.