HOST COMMAND SET REFERENCE
UNILINK HOST
ADAPTER5–53
USER MANUAL
Table 5–5 Baud Rates
0
0
0
0
0
0
0
0
1
1
000
MSB LSB
0
0
0
1
1
1
1
0
0
0
1
1
0
0
1
1
0
0
1
0
1
0
1
0
1
0
1
110
150
300
600
1200
2400
4800
9600
19200
38400
Baud Rate
1
10
01
10
157600
115200 *
*
* Not available on host port.
Option–02
= This parameter defines the Channel A RTS/CTS delay or
the
maximum allowable delay between the
assertion of RTS and the
activation
of CTS
by the network modem. The value is specified in
milliseconds
and ranges from 0 to 1,000 ms (0000 hex to 03E8 hex)
in increments of 1 ms and will default to 1,000 ms. This
parameter is only needed for RS–232–C/RS–423–A media
networks
and will return the ERROR RESPONSE
if specified for
Local Line media. The REPORT NETWORK MANAGER
CONFIGURATION command will return zero for the value of
this
parameter for Local Line channels.
The
default value of 1,000 ms was defined to allow operation
with
a
wide variety
of modems, but cause the network operation to be
very slow. You can improve the performance of your network by
tuning the value of this parameter. Most typical modems will
work properly with a delay of 15 ms. You can start at this value
and either increment or decrement it until the circuit functions
properly.
Option–03
= The Channel B RTS/CTS delay
, specified as described above.