HOST COMMAND SET REFERENCE
UNILINK HOST
ADAPTER 5–12
USER MANUAL
5.3.4
Connect Secondaries — 04
The CONNECT SECONDARIES command logically connects one or more
secondaries to the network. Each host computer must issue this command for
the
secondary devices that it will be communicating with.
Trying
to connect many secondary devices at the same time could cause the host
command time-out to expire if the secondary devices do not respond in that time
limit.
If this occurs, the error response will be returned and the host computer
will have to retrieve the secondary log to determine which secondary devices
were
connected.
Command: 04 [aa]
Response: 04 [bb]
Usage: INITIATION
Modes:
MHIU/EHA,
HIU/EHA, MHIU, HIU
Parameters:
aa The
secondary addresses to be connected. Specifying
address FF
will
attempt to connect all secondaries.
bb The
secondary addresses that
connected properly
. If bb is 00 hex,
none
of the secondaries addressed were connected.